Case studies

Where SAPFIR already stands guard

Škoda Auto, Hyundai, CRH, Synthesia, OLO, Mondi. Most of them came to us after a fire had already cost them something. Below is what each site needed and how it turned out.

Škoda Auto — Mladá Boleslav
Industry · 2017

Škoda Auto — Mladá Boleslav

Škoda Auto · Mladá Boleslav, Česká republika

After a bad experience with gas suppression in the engine shop, they needed something that harms neither electronics nor people.

Read the case study
Hyundai Motors — robotic lines in SK and CZ
Industry · 2018

Hyundai Motors — robotic lines in SK and CZ

Hyundai Motors SR + ČR · Slovensko a Česká republika

After a robotic line fire ran into millions, the Korean head office sent representatives to Slovakia.

Read the case study
DEZA a.s. — 25-litre peroxide suppression test
Industry · 2018

DEZA a.s. — 25-litre peroxide suppression test

DEZA a.s. · Česká republika

The standards called for 12 kg of powder. The head of the works brigade bet that 4 kg would not do it. It did.

Read the case study
Synthesia Pardubice — chemicals and explosives
Industry · 2016

Synthesia Pardubice — chemicals and explosives

Synthesia a.s. · Pardubice, Česká republika

Chemical production, explosives manufacture, cable ducts and munitions stores. Working together since 2016.

Read the case study
Nidec — prototype furnace suppression
Industry · 2018

Nidec — prototype furnace suppression

Nidec Global Appliance Slovakia s.r.o. · Slovensko

Gas suppression failed to put the furnace out and burned with it. The plant director puts the saving from the new system above a million euros.

Read the case study
JAS Plastik Galanta — polystyrene and pentane
Industry · 2019

JAS Plastik Galanta — polystyrene and pentane

JAS Plastik · Galanta, Slovensko

Twenty silos releasing explosive pentane. The space must stay ventilated and the suppression must not wait.

Read the case study
MONDI Štětí — conveyors without water
Industry · 2019

MONDI Štětí — conveyors without water

MONDI Štětí a.s. · Štětí, Česká republika

In Ružomberok a conveyor tower burned down while the dry riser was still being coupled to a tanker.

Read the case study
Mondi — the KAMIR conveyor tower
Industry · 2020

Mondi — the KAMIR conveyor tower

Mondi · Česká republika

The lower part of the tower rotates about its own axis, so wiring the top to the bottom was impossible.

Read the case study

You know the risk. We can draw up the answer within a week.

We walk the site, split it into suppression zones and specify the modules. No mains power, no pressure, a 12-year service life.