For places where 110 °C is a normal working temperature. Mines, furnaces, locomotives.
The price follows the number of zones and the floor area. Send a plan or a description of the site and you'll get an itemised breakdown.
12-year service life with annual inspections
Safe for people, animals and property. Once the fire is out, the powder vacuums or sweeps up.
Inside a rotor-baking furnace, 180 °C is the normal state — a 110 °C sensor would fire the suppression every shift. The TPS-02 and TPS-03 are therefore built for a 120 to 220 °C range. They trigger both MPH modules and SA-01 signalling systems. They are used in mines, on locomotives and in furnaces, wherever you must tell hot working conditions apart from an actual fire.
| Activation range | 120–220 °C |
|---|---|
| Power supply | none |
| Triggers | MPH modules, SA-01 signalling |
Tell us what you're protecting and how large the space is. You'll get the breakdown: module count, sensors, installation, inspection.
Or call us +421 908 733 659
Same category, different figures. Compare area and volume — that's what the choice comes down to.
The basic autonomous sensor. Needs no power source and triggers up to 16 modules.
Pull the pin and suppression starts. No waiting for 72 °C.
The TPS-01, plus a signal to the fire panel or another device.
An anti-vibration pad and a shield over the thermal element. For mines, chemical plants, locomotives.
