Fire-suppressing lamp 2.8 with sensor
Suppression lamps

Fire-suppressing lamp 2.8 with sensor

The sensor is built into the lamp. Recessed at least halfway into plasterboard.

Fire classes covered
  • A solids
  • B liquids
  • C gases
  • E electrical
Model code
LAMP-2.8-S
Price on request

The price follows the number of zones and the floor area. Send a plan or a description of the site and you'll get an itemised breakdown.

12-year service life with annual inspections

Safe for people, animals and property. Once the fire is out, the powder vacuums or sweeps up.

Overview

A minimal shape in white and black, with no visible hardware. The sensor sits inside the lamp, so there is no separate ceiling point to plan and no run to it. It recesses at least 50 % into a plasterboard ceiling — for a practical reason: after a discharge you swap the cartridge and the ceiling stays intact. It triggers above 72 °C sustained for more than 20 seconds, or instantly on a sharp rise past 150 °C.

What this model handles

  • Built-in thermal sensor — no separate ceiling point
  • White and black, minimal design
  • Recesses at least 50 % into plasterboard
  • After a discharge only the cartridge is replaced; the ceiling stays intact

Technical specification

Technical specification — Fire-suppressing lamp 2.8 with sensor
Activation temperature above 72 °C for more than 20 s
Instant activation on a rise to 150 °C or more
Recess depth at least 50 % into plasterboard
Finishes white, black
Guarantee 12 years

What the fire classes mean

A
solids wood, paper, textiles, plastics, coal
B
liquids petrol, oils, paints, thinners, varnishes
C
gases LPG, natural gas, acetylene
E
electrical live equipment, switchboards, transformers up to 40,000 V

Want a price for your site?

Tell us what you're protecting and how large the space is. You'll get the breakdown: module count, sensors, installation, inspection.

Similar models

Same category, different figures. Compare area and volume — that's what the choice comes down to.