Recommendation
This is what fits your case
Fire-suppressing lamp
It replaces the ceiling light and suppresses at the same time. The 6A model covers 50 m² / 150 m³ and fires once 72 °C holds for more than 20 seconds, or immediately on a sharp rise past 150 °C. The powder harms neither electronics nor antiques and is vacuumed up afterwards. With a large table, sofa or bookcase, reckon on two lamps — a single central discharge only covers a room without obstacles.
Models
Hasiaca lampa 2,8 / 2,8 A / 4A / 6A + TPS-01-72
Price on request
Model 2,8 lamp with a built-in sensor
A minimalist version for plasterboard, recessed at least halfway in. After a fire you swap the cartridge and leave the ceiling alone. The alternative is the gold lamp without a sensor in a dual set-up: two lamps and one central sensor.
Models
Hasiaca lampa 2,8 so senzorom / zlatá lampa 2,8 + TPS-01-72
Price on request
MPH-0.65 inside the cabinet
The smallest module in the range. It covers 1.2 m² / 2.4 m³ and is built for electrical wiring and cabinets, cable ducts and shafts, motors and raised floors. It suppresses live equipment up to 40,000 V without damaging the electronics — which water and foam cannot do. A TPS-01C sensor also sends a signal to the fire panel.
Models
MPH-0.65 + TPS-01C
Price on request
MPH-2.8 or MPH-4
A garage carries two risks at once: electrics and liquids on the floor. MPH-2.8 covers 33 m² / 65 m³ in class A and 14 m² / 17 m³ in class B; MPH-4 handles 40 m² / 100 m³ and 16 m² / 20 m³ respectively. Volume decides, not the floor.
Models
MPH-2.8 / MPH-4 + TPS-01-93
Price on request
MPH-6, MPH-9 or MPH-24
A warehouse is zoned around racking and aisles. MPH-6 covers 50 m² / 150 m³, MPH-9 goes to 72 m² / 144 m³, and MPH-24 with its 20 m reach covers 75 m² / 250 m³. The powder needs a clear path to the seat of the fire, so modules go where fires start rather than evenly across the ceiling.
Models
MPH-6 / MPH-9 / MPH-24 + TPS-01-93
Price on request
MPH-10st or MPH-24
MPH-10st has an adjustable discharge angle and sits above production lines and conveyor belts. MPH-24 reaches up to 20 m and covers 75 m² / 250 m³ — it belongs in large open spaces and buildings with a raised fire risk. Suppression leaves control electronics intact and puts nobody in the hall at risk.
Models
MPH-10st / MPH-24 + TPS-01TC
Price on request
SAPFIR LOCO
The system for locomotives and rail machines. It is split into zones — zone 1 is usually engine suppression, the others cover axle gearboxes or hydraulic grinding heads and hoses. Modules come in the transport version with a vibration compensation pad and a guard over the thermal element. MPH-2.8T can take a discharge director: the module sits at a safe distance and the powder is piped straight into the engine bay.
Models
SAPFIR LOCO — MPH-5T / MPH-5T-2 / MPH-2.8T + TPS-01T
Price on request
Transport version T with SuperSeal
The red transport-version modules stand up to gases, acidic environments, high temperatures and vibration. The SuperSeal connector rules out any contact between the environment and live parts on activation, which is what makes them usable underground. An external protective cover is optional.
Models
MPH-2.8T / MPH-5T / MPH-24T, konektor SuperSeal + TPS-01T / TPS-02 / TPS-03
Price on request
APPS MPH-5T
An autonomous system on a support pad that is simply set down in place. No drilling, no bracket. It covers 78 m² / 78 m³ in class A and 9.6 m² in class B. The powder discharges horizontally around its own axis, so there is no recoil. It belongs in cable ducts, lofts and plasterboard build-ups.
Models
APPS MPH-5T + TPS-01T
Price on request
Raptor or Ranger
Mobile suppression for places the fire brigade cannot reach in time. Raptor carries 4 MPH-24 modules and covers 300 m² / 1,000 m³; it tows behind a car or rides on a pallet truck. Ranger has 9 modules, covers 675 m² / 2,250 m³, and its lever tower rotates horizontally and vertically without moving the chassis. After a discharge the modules are swapped and suppression continues.
Models
TPS-431.24 Raptor / TPS-920.24 Ranger (MPH-24)
Price on request
MPH modules and TPS sensors
The basic set-up: a TPS thermal sensor and one or more MPH modules sized to the area and volume of the zone. Exactly how many is what the coverage calculator is for.
Models
MPH + TPS
Price on request
-
The powder suppresses live equipment up to 40,000 V and leaves electronics intact. Water and foam cannot; gas suppression puts anyone in the room at risk.
-
Flammable liquids mean class B. Every module covers markedly less in class B than in class A, so you will need more of them.
-
Class A is the kindest case — module coverage is at its highest. Afterwards the powder is simply vacuumed or swept up.
-
With vibration and aggressive environments, use the TPS-01T sensor with its compensation pad and thermal element guard.
-
At sustained temperatures of 120 to 220 °C the sensor is a TPS-02 or TPS-03. A standard TPS-01 would trigger there without a fire.